DP1.2-Vision - transmission of DisplayPort 1.2 signals via CAT or fibre optics
The system consists of a computer module (transmitter) and a user module (receiver) and enables you to operate a computer on a local or remote console.
DP1.2-Vision uses CAT-x cables or fibre optics to transmit signals up to 140 m (CAT) or up to 10,000 m (Fiber). The devices use DisplayPort 1.2 video and are available as single and multi channel variant. It is also possible to transmit transparent USB 2.0, RS232 and audio signals.
Video
- Support of DisplayPort 1.2a video
- Support of 4K and ultra HD resolutions at 60 Hz
- Transmission is compressed, pixel perfect, with low latency and ideal hand eye coordination
- Pixel encoding RGB 4:4:4 with 24bpp / 8bpc
- Resolution with pixel rates between 25 MPixel/s and 600 MPixel/s at the computer module, at the local console and at the user module
- 24 bit colour depth
- Exemplary resolutions: 4096x2160/60Hz (4Kp60Hz), 3840x2160/60Hz (Ultra-HD/60Hz), 1920x1200/60Hz, 2560x1600/60Hz, 2048x2048/60Hz (2Kx2K)
- Further VESA and CEA standardized resolutions with refresh rates within the range of the maximum pixel rate as well as horizontal and vertical frequency possible
- Horizontal frequency: 25kHz - 180kHz
- Vertical frequency: 24Hz - 200Hz
Operation
- Can be operated in extender or matrix mode
- Ident LED to quickly find devices in complex installations
- Web interface for configuration, monitoring and updates
- SNMP (trap and agent)
- Permanent keyboard and mouse emulation
- Permanent monitor emulation
- E-EDID support
- Local console at computer module
- Freeze function at remote console
Signals
- Embedded audio on DisplayPort up to stereo PCM
- Audio stereo bidirectional
- RS232 transparent
- Support of PS/2 and USB keyboard/mouse (even in mixed mode). On computer side, PS/2 keyboard only
- Optional transparent USB2.0 (16Mbit/s) transmitted on primary KVM transmission channel
- Optional transparent USB2.0 (HiSpeed, 480Mbit/s) transmitted on additional transmission channel
Transmission
- Distances up to 140 meters at maximum resolution over CAT-x cable (depending on cable: x = 5e, 6, 7)
- Distances up to 400 metres at maximum resolution with multimode fiber optics
- Distances up to 5,000 (S) or 10,000 m (S+) metres at maximum resolution with singlemode fiber optics
Device
- Redundant power supply
- Internal power pack for main power supply
- Ventilation concept for the use in cold/hot aisle installations
- Galvanic separation of transmitter and receiver with fiber optics, resistant against interference radiation
- High reliability
No downloads available for this product
No videos available For this product